Risk evaluation in the Workplace - Part 2

Coshh Assessment - Risk evaluation in the Workplace - Part 2

Good afternoon. Today, I found out about Coshh Assessment - Risk evaluation in the Workplace - Part 2. Which could be very helpful to me and you. Risk evaluation in the Workplace - Part 2

Step 3. Evaluate the risks and decide whether existing precautions are enough or more should be done.

What I said. It isn't the final outcome that the real about Coshh Assessment. You check this out article for information on what you wish to know is Coshh Assessment.

Coshh Assessment

Consider how likely it is that each hazard could cause harm. This will decide whether or not you need to do more to sacrifice the risk.

Even after all precautions have been taken, some risk commonly remains. What you have to decide for each significant hazard is whether this remaining risk is high, medium or low.

Firstly, ask yourself whether you have done all the things that the law says you have got to do.

As an example, there are legal requirements on stoppage of entrance to hazardous parts of machinery. Then ask yourself whether ordinarily thorough manufactures standards are in place. But do not stop there, think for yourself, because the law also says that you must do what is reasonably practicable to keep your workplace safe.

Your real aim is to Make All Risks Small by adding to your precautions as necessary.

If you find that something needs to be done, draw up an operation list, and give priority to any remaining risks which are high, and those which could work on most people.

In taking operation ask yourself:

1. Can you get rid of the hazard altogether?

2. If not, how can you control the risks, so that harm is unlikely?

In controlling risks apply the law below, if possible in the following order:

1. Try a less risky option.

2. Preclude entrance to the hazard (eg by installing guards).

3. Organise work to sacrifice exposure to the hazard.

4. Issue personal protective equipment.

5. Furnish welfare facilities (eg washing facilities for extraction of contamination) and first aid.

Improving condition and protection need not cost a lot. For instance, placing a mirror on a hazardous blind angle to help Preclude car accidents or putting some non-slip material on slick steps, are relatively inexpensive precautions inspecting the risks.

And failure to take easy precautions can cost you a lot more if an accident does happen.

But what if the work you do tends to vary a lot, or if you and your employees move from one site to another?

Identify the hazards you can reasonably expect and compare the risks from them. Then, if you spot any supplementary hazards when you arrive at the site.

Get facts from others on site, and take what operation seems necessary.

But what if you share a workplace?

Tell the other employers and self-employed habitancy working there about any risks your work could cause them, and also the precautions you are taking. Also, think about the risks to your own workforce from those who share your workplace.

But what if you have already assessed some of the risks?

If. For example you use hazardous chemicals and you have already assessed the risks to condition and the precautions you need to take under the control of Substances hazardous to condition Regulations (Coshh), you can think them checked and move on.

More facts about legal requirements and standards can be found in the Hse publications:

An Introduction to condition and Safety.

Essentials of condition and Safety.

Management of condition and protection at Work: Approval Code of Practice.

That's it for this section... I'll cover Steps 4 and 5 in Part 3.

I hope you get new knowledge about Coshh Assessment. Where you can put to used in your daily life. And just remember, your reaction is passed about Coshh Assessment.